To Next Page

To Previous Page

HP BladeSystem c-Class Server Blades

An HP c-Class server blade is a full-function server that slides into an HP BladeSystem c-Class

enclosure, in contrast to a server that is mounted in a rack. One great advantage of blade

architecture is the easy addition of more server blades to your environment.

HP BladeSystem c-Class enclosures support server blade models that are built in standardized form

factors, referred to as half-height (4U) or full-height (8U).

ProLiant Server Blades

HP ProLiant c-Class server blades share the same features and design standards of traditional

rack-mounted ProLiant servers. A variety of server blade models is available, each with different

features, such as using different processors, number of processors included, memory types, and

maximum amount of supported memory.

To learn more about available server blade models and their features, see the HP BladeSystem

c-Class ProLiant Server Blades website: http://h18004.www1.hp.com/products/blades/

components/c-class-bladeservers.html.

Example full-height, double-wide server

blade

Example full-height server bladeExample half-height server blade

For more information

Device website: http://h18004.www1.hp.com/products/blades/components/

c-class-bladeservers.html

BladeSystem Technical Resources website: http://www.hp.com/go/bladesystem/documentation

Be sure to read the following documents, shipped with the server blade and BladeSystem enclosure:

• HP ProLiant Server Blade Installation Instructions—Includes physical installation instructions.

• HP BladeSystem c-Class Solution Overview Setup Poster—Provides an overview of the complete

installation process of an HP BladeSystem c-Class solution.

HP BladeSystem c-Class Server Blades 13

HP P2000 Deployment Guide

Other manuals for HP P2000