P2000 G3 MSA Array System Command Line Interface
The embedded CLI offers a command level method of configuring, managing, and monitoring the
P2000 G3 MSA Array and its storage. You can enter individual commands or command scripts.
The CLI is accessed locally through a terminal emulator running on a management host connected
to the serial port on the P2000 G3 MSA Array controller or remotely through a Secure Shell
application (SSH), Telnet, or terminal emulator running on a management host connected through
a LAN to the Ethernet port on the P2000 G3 MSA Array controller. For more information about
using the CLI, see the HP P2000 G3 MSA System CLI Reference Guide.
The following image shows a CLI display for the show vdisks and show volumes command.
32 Software information
To Next Page
Loading...
Need help?
General