is installed in the BladeSystem c-Class enclosure, the storage volumes will be immediately
visible to that server.
◦ For information about mapping volumes using the SMU, see “Managing Host Access to
Volumes” in the HP P2000 G3 MSA System SMU Reference Guide.
◦ For information about mapping volumes using the CLI, see the “Map volume” section in
the HP P2000 G3 MSA System CLI Reference Guide.
• When mapping, be sure to choose all P2000 G3 SAS MSA controller ports (A1, A2, A3,
A4, B1, B2, B3, and B4), to guarantee access in the event of a controller, port, or cable
failure. During a failover, if access is granted to all P2000 G3 SAS MSA controller ports, I/O
will fail over to ports on the surviving controller.
22 Device information
To Next Page
Loading...
