Removal and Replacement Procedures 31
IMPORTANT: An immediate shutdown is a hardware-controlled
function and it overrides any firmware or software actions.
Item Description Zone Configuration
1 Fan 1 Processor Redundant
2 Fan 2 Processor Primary
3 Fan 3 I/O Redundant
4 Fan 4 I/O and processor Primary (shared)
5 Fan 5 Processor Primary
6 Fan 6 Processor Primary
7 Fan 7 Power supply and
processor
Primary (shared)
8 Fan 8 Power supply Redundant
To remove the component:
1. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page 18, "Removing the Server from the Rack" on page 21).
2. Remove the access panel ("Removing the Access Panel" on page 21).
3. Use the fan LEDs ("Hot-Plug Fan LED" on page 107) and fan locations table
to identify if the fan zone is redundant:
HP CONFIDENTIAL
File Name: 291916-3.doc Last Saved On: 5/19/03 10:29 AM
To Next Page
Loading...
