EasyManuals Logo

HP ProLiant ML150 User Manual

HP ProLiant ML150
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
Installing and Configuring
Security
Use this menu option to set Power-on password protections and hardware security options.
Four choices are available under Security:
Change Supervisor Password - Use this option to set the Supervisor password, which
will require a password to enter the Setup Utility or complete the boot process.
The Supervisor password must be set before setting the User password or Network Server
mode. Once the Supervisor password is set, the Supervisor can access and change all
fields in the Setup Utility screens.
Network Server Mode – When set, the system prompts for a password when booting
from a flexible disk or CD-ROM, but not when booting from a hard drive. The power
switch and keyboard are locked until the password is typed.
Change User Password – Use this option to set the user password, which will require a
password to enter the Setup Utility or complete the boot process.
If the User password is set, the user may change the system time, date, user password,
and a limited number of items in the various screens of the Setup Utility. The user may
view all screens in the Setup Utility, but can't alter all of the settings.
Clear User Password – Use this option to clear the user password.
Boot Sector Virus Protection – Use this option to prevent computer viruses by
protecting the hard disk boot sector (partition table) from any change if enabled.
Exit
Use this menu option to save changes or discard changes, which reverts to previous settings.
When you exit, the HP server reboots.
Save Changes and Exit – Use this option (or press the F10 key) to save the changes you
have made and exit the Setup Utility.
Discard Changes and Exit – Use this option (or press the Esc key) to exit the Setup
Utility without saving the changes you have made.
Discard Changes – Use this option (or press the F7 key) to discard any changes you
have made.
Load Optimal Defaults – Use this option (or press the F9 key) to load optimal values for
all items.
Load Failsafe Defaults – Use the option (or press the F8 key) to load failsafe values for
all items.
HP ProLiant ML150 Server Operations and Maintenance Guide 2-37
HP CONFIDENTIAL Codename: Stone Soup Part Number: 343329-001 Last Saved On: 8/14/03 10:09 AM

Table of Contents

Other manuals for HP ProLiant ML150

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProLiant ML150 and is the answer not in the manual?

HP ProLiant ML150 Specifications

General IconGeneral
Tcase72.8 °C
Bus typeQPI
SteppingR2
FSB ParityNo
Scalability2S
Processor cache15 MB
Processor cores6
Processor modelE5-2603V3
System bus rate6.4 GT/s
Processor seriesIntel Xeon E5-2600 v3
Processor socketLGA 2011-v3
Processor codenameHaswell
Motherboard chipsetIntel C610
Number of QPI links2
Processor frequency1.6 GHz
Processor cache typeSmart Cache
Processor lithography22 nm
Processor manufacturerIntel
Processor package size52.5 x 45 mm
Processor front side bus- MHz
Processor operating modes64-bit
ECC supported by processorYes
PCI Express configurationsx4, x8, x16
Supported instruction setsAVX 2.0
Thermal Design Power (TDP)85 W
Number of processors installed1
Physical Address Extension (PAE)46 bit
Maximum number of PCI Express lanes40
Memory types supported by processorDDR4-SDRAM
Memory channels supported by processorQuad
Memory clock speeds supported by processor1600 MHz
Memory bandwidth supported by processor (max)51 GB/s
Maximum internal memory supported by processor768 GB
HDD size- \
RAID support-
HDD interfaceSerial ATA
Total storage capacity0 GB
Maximum storage capacity- TB
Number of HDDs installed0
Memory slots16x DIMM
Internal memory4 GB
Memory clock speed2133 MHz
Maximum internal memory256 GB
Memory layout (slots x size)1 x 4 GB
Graphics card familyNVIDIA
Intel® Virtualization Technology (Intel® VT)VT-d, VT-x
Ethernet interface typeGigabit Ethernet
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity4
Chassis typeRack (1U)
Power supply550 W
Processor ARK ID83349
Intel Secure Key Technology version1.00
Intel Identity Protection Technology version0.00
PCI Express slots version3.0
Weight and Dimensions IconWeight and Dimensions
Depth620 mm
Width200 mm
Height432.6 mm
Weight22230 g

Related product manuals