HP StorageWorks P9000

Table 50 Error codes (part code 6005) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WAdd another path, or delete
all pairs on the RCU. Then
retry the operation.
The Edit Path operation was rejected
because the specified path is the last
path of some Remote Copy pairs.
87236005
WThe specified number of
paths is less than the
minimum number of paths
specified on the RCU Option
window.
Specified number of paths is less than
the minimum specified on RCU Option
screen.
87246005
WThe version of the microcode
on the XP512/XP48 Disk
Array does not support the
specified function or
operation. Please contact HP
Technical Support.
Current microcode version does not
support the specified operation.
87256005
WAdd the normal path(s), then
set the minimum number of
paths.
The number of minimum paths exceeds
the number of normal paths.
87276005
WPlease take either of the
following actions:
Add normal paths, then
delete the paths.
Decrease the number of
minimum paths, then delete
the paths.
The number of minimum paths exceeds
the number of normal paths.
87286005
EPlease contact HP Technical
Support.
An internal error occurred.87296005
WIf you are adding RCUs,
specify the same logical
address.
If you are editing paths,
specify the same logical
address as the existing
paths. (See the Edit Path
dialog box.)
Invalid Logical Addresses are specified.87306005
WThe logical addresses of all
existing paths are not the
same. Delete the RCU, then
re-add it, using the same
logical address as other
existing paths.
The existing logical addresses are not
equal.
87316005
WThe maximum number of
SSIDs (four) has been
entered. Verify that the SSIDs
are valid, delete one or
more, then retry the
operation.
Too many SSIDs (only Four SSIDs are
allowed).
87326005
WInstall the program product
key in the MCU.
The Fibre-Remote Copy function is not
installed in the specified MCU.
87336005
WInstall the program product
key in the RCU.
The Fibre-Remote Copy function is not
installed in the specified RCU.
87346005
142 Message (part code group 6nnn)