HP StorageWorks P9000 - Page 170

Table 52 Error codes (part code 6010) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
iFollow the instructions in the message.Are you sure you want to exchange the
specified ports? Please confirm the
associated channel paths are off-line.
90246010
iTo continue the operation, click [OK].
Otherwise, click [Cancel].
Are you sure you want to switch the
ports? If the remote copy paths exist on
the ports, delete them beforehand.
90256010
iTo continue the operation, click [OK].
Otherwise, click [Cancel].
Are you sure you want to switch the
ports? If any remote copy paths exist on
the ports, delete them beforehand. Also,
to avoid the switching operation from
being reported as a failure, confirm first
that a message prompting you to change
the channel cable connections is
displayed, and then perform the
necessary changes.
90266010
WTo delete the specified RCU, click [OK].
Otherwise, click [Cancel].
Are you sure you want to delete the
specified RCUs?
90706010
WTo delete the specified path, click [OK].
Otherwise, click [Cancel].
Are you sure you want to delete the
paths of a specified RCU?
90716010
WTo delete the specified pair, click [OK].
Otherwise, click [Cancel].
Are you sure you want to delete the
specified volume pairs?
90726010
iTo suspend the specified pair, click [OK].
Otherwise, click [Cancel].
Are you sure you want to suspend the
specified volume pairs?
90736010
WTo delete the specified SSID, click [OK].
Otherwise, click [Cancel].
Are you sure you want to delete the
SSIDs of a specified RCU?
90756010
iTo close the window, click [OK].
Otherwise, click [Cancel].
Do you want to exit?91006010
iTo cancel, click [OK].Do you want to cancel?91016010
iClick [OK] to execute the operation.Do you want to apply?91026010
iNot used.Do you want to change?91036010
iIf you want to switch the mode, click
[OK]. If not, click [Cancel].
Do you want to change the mode?91046010
WTo close the window, click [OK]. To not
close the window, click [Cancel].
The value that is under setup is not
reflected yet. Do you want to exit?
91056010
WTo change the mode, click [OK]. To not
change the mode, click [Cancel].
The value that is under setup is not
reflected yet. Do you want to change the
mode?
91066010
WTo continue processing, click [OK]. To
stop processing, click [Cancel].
The value that is under setup is not
reflected yet. Do you want to continue
the operation?
91076010
WTo delete the specified line of settings
from the Preview list, click [OK].
Otherwise, click [Cancel].
Do you want to delete the specified line
of settings from the Preview list?
91116010
iTo continue the current operation, click
[OK]. Otherwise, click [Cancel].
Do you want to continue this operation?91126010
WTo clear the remote copy related SIM,
click [OK]. Otherwise, click [Cancel].
Are you sure you want to clear SIMs of
Remote Copy?
91136010
170 Message (part code group 6nnn)