Table 52 Error codes (part code 6010) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
iTo continue the process, click [OK].
Otherwise, click [Cancel].
The value has been changed. Do you
want to continue the operation?
91146010
iClick [OK].The monitoring was stopped by another
operator. The graph will be closed.
91156010
iClick [OK].Another operator has changed the
Gathering Interval value. The graph will
be closed.
91166010
WTo close the graph, click [OK].
Otherwise, click [Cancel].
Are you sure you want to close the
graph?
91176010
iTo apply this setting, click [OK].
To change the setting, click [Cancel].
Please check the specified value.91186010
WSelect a graph item.No graph item has been selected. Please
select a graph item.
91196010
WTo execute the processing and close the
graph, click [OK], Otherwise, click
[Cancel].
The graph will be closed if you execute
the processing. Do you want to execute
the processing?
91206010
WTo execute this operation, click [OK],
Otherwise, click [Cancel].
Data has been changed and the graph
has been displayed. If you continue this
operation, all the data and the graph
will become invalid. Are you sure you
want to continue this operation?
91216010
iTo output pair status into a snapshot file,
click [OK]. To cancel this operation, click
[Cancel].
Are you sure you want to export pair
status?
91226010
iTo continue the operation, click [OK]. To
cancel the operation, click [Cancel].
This process may take up to %d minutes.
Do you want to continue?
91246010
WTo stop the operation, click [OK]. To
continue the operation, click [Cancel].
Are you sure you want to cancel the
export?
91256010
WTo terminate the script, click [OK].
Otherwise, click [Cancel].
The script is running now. Are you sure
you want to terminate the script?
91266010
WTo close the graphs, click [OK].
Otherwise, click [Cancel].
Are you sure you want to close all active
graphs?
91276010
WClick [OK], then specify the correct
volume.
The specified volume was not found.91286010
iClick [OK] to continue processing.Recovered from the error that occurred
when copying started.
91296010
iFollow the instructions in the message.As a result of this operation, you will not
be able to re-start ERASE R-VOL
operation. To delete the pair forcibly,
please try again with 'Force' option.
91546010
iClick [OK].The history file has been updated. Select
the OK button to display the history logs
from the beginning.
91556010
Part code 6010 171
To Next Page
Loading...
