Contents
Component identification.......................................................................6
Front panel components............................................................................................................... 6
Front panel LEDs and buttons...................................................................................................... 7
Front panel LED power fault codes....................................................................................8
Serial label pull tab information.......................................................................................... 8
Drive numbering............................................................................................................................9
Hot-plug drive LED definitions...................................................................................................... 9
NVMe SSD components............................................................................................................. 10
SFF flash adapter components and LED definitions...................................................................11
SUV cable connectors................................................................................................................ 12
System board components......................................................................................................... 13
System maintenance switch.............................................................................................14
DIMM slot locations..........................................................................................................15
DIMM label identification.................................................................................................. 15
NVDIMM identification......................................................................................................17
NVDIMM LED identification..............................................................................................18
Mezzanine connector definitions......................................................................................19
Mezzanine connector guide pin locations........................................................................ 19
Operations............................................................................................. 21
Power up the server blade.......................................................................................................... 21
Power down the server blade..................................................................................................... 21
Remove the server blade............................................................................................................22
Remove the access panel...........................................................................................................22
Install the access panel...............................................................................................................23
Remove the DIMM baffles...........................................................................................................23
Install the DIMM baffles...............................................................................................................25
Remove an M.2 SSD from the M.2 riser board...........................................................................26
Remove the M.2 interposer board and the M.2 riser board........................................................ 27
Relocate the PEM nut and rubber stopper..................................................................................28
Remove the direct connect SATA cable......................................................................................31
Install the direct connect SATA cable..........................................................................................31
Remove the mezzanine assembly.............................................................................................. 32
Install the mezzanine assembly.................................................................................................. 33
Remove the FlexibleLOM........................................................................................................... 33
Remove the storage controller or NVMe pass-through board.................................................... 34
Remove an NVMe SSD.............................................................................................................. 35
Remove a SAS or SATA drive.....................................................................................................35
Remove the front panel/drive cage assembly.............................................................................36
Install the front panel/drive cage assembly.................................................................................37
Setup...................................................................................................... 39
Overview..................................................................................................................................... 39
Server blade warnings and cautions...........................................................................................39
Installing an HPE BladeSystem c-Class enclosure.....................................................................39
Preparing the enclosure................................................................................................... 40
Installing server blade options.................................................................................................... 40
Installing interconnect modules...................................................................................................40
3
To Next Page
Loading...
