ItemItem LEDLED StatusStatus DefinitionDefinition
1 Fault/Locate Solid amber The drive has failed, is unsupported, or is invalid.
Solid blue The drive is operating normally and being identified by a management
application.
Flashing amber/blue (1 flash
per second)
The drive has failed, or a predictive failure alert has been received for
this drive. The drive has also been identified by a management
application.
Flashing amber (1 flash per
second)
A predictive failure alert has been received for this drive. Replace the
drive as soon as possible.
2 Online/Activity Solid green The drive is online and has no activity.
Flashing green (4 flashes per
second)
The drive is operating normally and has activity.
Flashing green (one flash per
second)
The drive is doing one of the following:
Rebuilding
Performing a RAID migration
Performing a strip size migration
Performing a capacity expansion
Performing a logical drive extension
Erasing
Spare part activation
Off The drive is not configured by a RAID controller or a spare drive.
Smart Carrier (SC) drive LED definitionsSmart Carrier (SC) drive LED definitions
To Next Page
Loading...
