HPE ProLiant DL160 Gen10 - Removing and replacing the front bezel; Procedure

2. Select Enhanced CPU Cooling.
3. Save your setting.
Removing and replacing the front bezelRemoving and replacing the front bezel
ProcedureProcedure
1. If installed, remove the Kensington security lock.
For more information, see the lock documentation.
2. Press the bezel release latch (callout 1), and then pivot the bezel open (callout 2).
3. Release the right side of the bezel from the front panel.
HPE ProLiant DL160 Gen10 Server Maintenance and Service Guide 45