10. To replace the component, reverse the removal procedure.
11. Properly dispose of the old battery.
For more information about battery replacement or proper disposal, contact an authorized reseller or an authorized service provider.
System board assembly replacementSystem board assembly replacement
SubtopicsSubtopics
Removing the system board assemblyRemoving the system board assembly
Replacing the system board assemblyReplacing the system board assembly
Re-entering the server serial number and product IDRe-entering the server serial number and product ID
Removing the system board assemblyRemoving the system board assembly
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have the following items available:
T-10 Torx screwdriver
T-15 Torx screwdriver
T-30 Torx screwdriver
System board handle tool
About this taskAbout this task
CAUTION:CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
To Next Page
Loading...
