HPE ProLiant DL160 Gen10 - Setting up the server

Remove the server from the rackRemove the server from the rack
PrerequisitesPrerequisites
Before you perform this procedure, review the:
Rack warnings and cautions
Server warnings and cautions
About this taskAbout this task
WARNING:WARNING: To reduce the risk of personal injury or equipment damage, be sure that the rack is adequately stabilized before
extending anything from the rack.
ProcedureProcedure
1. Power down the server.
2. Release the cable management arm .
3. Disconnect the cabling from the rear panel.
4. Extend the server from the rack .
5. Remove the server from the rack:
HPE ProLiant DL160 Gen10 Server Maintenance and Service Guide 37