9. Using an alcohol wipe, remove the existing thermal grease from the processor and heatsink. Allow the alcohol to evaporate before
continuing.
10. Remove the plastic cover protecting the thermal grease on the high performance heatsink.
11. Align the Pin 1 indicators on the processor and the heatsink, and then install the processor assembly to the heatsink.
12. Install the processor heatsink assembly:
a. Identify the front of server label on the heatsink.
b. Align the assembly with the alignment posts and gently lower it down until it sits on the socket.
The processor heatsink assembly will only install one way.
To Next Page
Loading...
