Installing the Installing the HPEHPE NS204i-p NVMe OS Boot Device NS204i-p NVMe OS Boot Device option option
PrerequisitesPrerequisites
Before beginning installation, ensure that the server is updated with the latest operating system firmware and drivers.
About this taskAbout this task
ProcedureProcedure
Installing drives onto the Installing drives onto the boot deviceboot device
1. Remove the liner from the thermal interface pad.
2. Install the drives.
Installing the Installing the boot deviceboot device
3. Power down the system .
4. Do one of the following:
Extend the front drive cages out of the chassis .
Remove the system from the rack .
Remove the compute module from the enclosure.
To Next Page
Loading...
