Press F10 at the boot screen to run Intelligent Provisioning.
IMPORTANT:IMPORTANT:
Smart array MR controllers are not supported by Intelligent Provisioning or Smart Storage Administrator.
Manually deploy an OS.
a. Insert the installation media.
For remote management, click Virtual Drives in the iLO remote console to mount images, drivers, or files to a virtual folder. If
a storage driver is required to install the OS, use the virtual folder to store the driver.
b. Press F11 at the boot screen to select the boot device.
c. After the OS is installed, update the drivers.
9. Register the server (http://www.hpe.com/info/registerhttp://www.hpe.com/info/register).
SubtopicsSubtopics
Operational requirementsOperational requirements
Server warnings and cautionsServer warnings and cautions
Rack warningsRack warnings
Electrostatic dischargeElectrostatic discharge
Server box contentsServer box contents
Installing hardware optionsInstalling hardware options
POST screen optionsPOST screen options
Installing or deploying an operating systemInstalling or deploying an operating system
To Next Page
Loading...
