HPE ProLiant DL560 Gen10 - System Inlet Temperature, Extended Ambient Operating Support; Mechanical Specifications; Power Supply Specifications

System Inlet Temperature, Extended Ambient Operating Support
Specification Value
System Inlet Temperature, Extended Ambient Operating
Support
—
— For approved hardware configurations, the supported system
inlet range is extended to be 5°C to 10°C (41°F to 50°F) and
35°C to 40°C (95°F to 104°F)
All temperature ratings shown are for sea level with an
altitude derating of 10 °C per every 175 m (18°F per every
574 ft) above 900 m (2953 ft) to a maximum of 3050 m
(10000 ft).
1
— For approved hardware configurations, the supported system
inlet range is extended to be 40°C to 45°C (104°F to 113°F)
All temperature ratings shown are for sea level with an
altitude derating of 10 °C per every 125 m (18°F per every
410 ft) above 900 m (2953 ft) to a maximum of 3050 m
(10000 ft).
1
1
System performance may be reduced if operating in the extended ambient operating range or with a fan fault.
The approved hardware configurations for this system are listed on the
Hewlett Packard Enterprise website.
Mechanical specifications
Specification
Value
Height 875 cm (344 in)
Depth 7547 cm (2971 in)
Width 4454 cm (1754 in)
Weight (maximum) 3412 kg (7523 lbs)
Weight (minimum) 1845kg (4067 lbs)
Power supply specifications
Depending on installed options, the server is configured with one of the following power supplies:
• HPE 800W Flex Slot Platinum Hot-plug Low Halogen Power Supply
• HPE 800W Flex Slot Titanium Hot-plug Low Halogen Power Supply
• HPE 800W Flex Slot Universal Hot-plug Low Halogen Power Supply
•
HPE 800W Flex Slot -48VDC Hot-plug Low Halogen Power Supply
• HPE 1600W Flex Slot Platinum Hot-plug Low Halogen Power Supply
158
Specifications