HPE ProLiant DL560 Gen10 - Re-Entering the Server Serial Number and Product ID

20. Power up the server.
21.
Ensure all firmware, including option cards and embedded devices, is updated to the same versions to ensure that the
latest drivers are being used.
22.
Re-enter any Secure Boot Keys that were previously added in the Secure Boot configuration.
23.
Re-enter the server serial number and the product ID (
Re-entering the server serial number and product ID).
24.
Set the server power supply requirements (
Setting the server power supply requirements).
25.
26.
Review the persistent memory configuration of the server.
For more information, see Configuring the server for HPE Persistent Memory.
27.
Do one of the following:
• If HPE Persistent Memory modules are encrypted with local key management, either manually enter the HPE
Persistent Memory module passwords in the System Utilities or import the password file from the USB key.
• If HPE Persistent Memory modules are encrypted with remote key management, enroll the server iLO in the key
management server to provide access to the data on the HPE Persistent Memory modules.
For more information, see the HPE Persistent Memory User Guide on the Hewlett Packard Enterprise website (https://
www.hpe.com/info/persistentmemory-docs).
Re-entering the server serial number and product ID
After you replace the system board, the server serial number and the product ID must be configured:
Procedure
1. Access System Utilities. During POST, press F9.
2. On the System Utilities home screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced
Options > Advanced Service Options.
3. Select the Serial Number field and press Enter.
Removal and replacement procedures
97