Removing and replacing the optical drive
Procedure
1. Power down the server (Power down the server).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
• Extend the server from the rack (
Extend the server from the rack).
• Remove the server from the rack (Removing the server from the rack).
4. Remove the access panel (
Removing the access panel).
5. If installed, do the following:
a.
Remove the air
bale (Removing and replacing the air bale).
b.
Remove the processor mezzanine tray (Removing and replacing the processor mezzanine tray).
c.
Remove the CPU Mezzanine UPI performance kit (
Removing and replacing the CPU Mezzanine UPI performance
kit).
6.
Remove the fan cage (Removing and replacing the fan cage).
7.
Remove the universal media bay (
Removing and replacing a universal media bay).
8.
Remove the optical drive.
9. Remove the optical drive bracket, for use with the replacement optical drive.
86
Removal and replacement procedures
To Next Page
Loading...
