a. Install the air bale.
b. Install the processor mezzanine tray.
c. Install the CPU Mezzanine UPI performance kit.
17. Install the access panel.
18. Install the server into the rack.
19. Connect the power cord to the power supply.
CAUTION: Connect the power cords using only the following supported configurations. Using an unsupported
power supply or cabling configuration can result in an unexpected loss of system power.
• Two power supply configuration—For redundancy, connect power supplies 1 and 2 to separate AC power circuits.
• Four power supply configuration—For redundancy, connect power supplies 1 and 2 to power circuit A, and then
connect power supplies 3 and 4 to power circuit B.
96
Removal and replacement procedures
To Next Page
Loading...
