CAUTION:CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
CAUTION:CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
either a component or a blank.
ProcedureProcedure
1. Back up all server data on the drive .
2. Remove the front bezel.
3. Observe the drive LED status and determine if the drive can be removed.
4. Remove the drive.
ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing drive blanksRemoving and replacing drive blanks
About this taskAbout this task
CAUTION:CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
either a component or a blank.
ProcedureProcedure
To Next Page
Loading...
