8. Disconnect the M.2 SATA SSD cable .
9. Remove the PCI blank retainer.
10. Remove the add-in card.
11. Remove the M.2 SATA SSDs from the add-in card.
Retain these SSDs for installation onto the new add-in card.
ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing the M.2 SATA SSD on the addRemoving and replacing the M.2 SATA SSD on the add‑in cardin card
PrerequisitesPrerequisites
To Next Page
Loading...
