HPE STOREONCE 5500

If neither of the recommended options are feasible, the factory-integrated option is also a viable option for
self-installing customers. Contact HPE Support for cabling details, if necessary.
Two enclosures above and two enclosures below the head server
The following diagram illustrates the cabling for all four enclosures where two enclosures are above and two
enclosures are below the head server. This configuration provides equal weight distribution in the rack. Refer
to the StoreOnce 5500 System Capacity Upgrade Guide for detailed step-by-step cabling instructions.
1
2
3
4
1
5
6
4
4
1
iLO
PS2
PS1
#1
#4
#2
#3
Figure 10: Cabling showing two enclosures installed either side of the server
NOTE:
Enclosure #1 and Enclosure #3 are in Storage Cluster 1, connected to the RAID controller card in slot 2.
Enclosure #2 and Enclosure #4 are in Storage Cluster 2, connected to the RAID controller card in slot 3.
34 Two enclosures above and two enclosures below the head server