HPE STOREONCE 5500

1
2
6
7
3
4
5
8
9
13
14
10
11
12
15
16
20
21
17
18
19
22
23
27
28
24
25
26
29
30
34
35
31
32
33
Figure 13: Disk bay locations
NOTE:
Disk bays 1 to 7 are at the front of the drawer.
When monitoring disk status from the StoreOnce GUI. the Location field on the Hardware tree identifies the
bay in which a disk is located. (Expand Storage Clusters to find drives within a specific drawer and drive
enclosure.)
Figure 14: Drives page on StoreOnce GUI
Distributing the disk drives correctly
The initial eleven disks (plus four hot-plug disks) in the disk enclosure are installed and preconfigured as
follows when the StoreOnce 5500 System is installed.
Table 8: Disk bays populated at installation
Disk Enclosure 1
Drawer 1 Drawer 2
Initial storage configuration Two spare hot disks in bays 34
and 35 and eleven disks in slots
23-33.
Two spare hot disks in bays 34
and 35.
38 Distributing the disk drives correctly