HPE STOREONCE 5500

1. Link Off: No link to the adapter is established. The adapter
is not receiving power or the cable connection is
faulty
On (yellow): Link to the adapter is established. The
adapter is receiving power and the cable connection
is good.
2. Activity Flashing green: Ongoing network data activity. The
adapter is sending or receiving network data at up to
10 Gb/s
Off: No network data activity or no connection.
Fibre Channel card LEDs
There are three LEDs adjacent to each FC port if you have StoreOnce Optional Hardware FC cards installed.
Table 14: 8 Gb FC card LEDs
Yellow LED Green LED Amber LED Activity
Off Off Off Power Off (OK)
On On On Power on before or after software
initialization. Awaiting HBA software
initialization.
Flashing Flashing Flashing Power on after software initialization. Link
not initialized.
Alternately flashing Alternately flashing Alternately flashing Software fault (OK)
Off Off On Connected at: 2 Gb/s
Off Off Flashing Activity at 2 Gb/s (OK)
Off On Off Connected at 4 Gb/s
Off Flashing Off Activity at 4 Gb/s (OK)
On Off Off Connected at 8 Gb/s
Flashing Off Off Activity at 8 Gb/s
Table 15: 16 Gb FC card LEDs
Yellow LED Green LED Amber LED Activity
Off Off Off Power Off (OK)
Table Continued
52 Fibre Channel card LEDs