EasyManua.ls Logo

HT I-V600 - GENERAL DESCRIPTION; Foreword; Instrument Functions

Default Icon
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
I-V600
EN - 5
2. GENERAL DESCRIPTION
2.1. FOREWORD
The instrument is designed to carry out performance measurements (I-V curve) and quick
pre-testing (IVCK) of photovoltaic (PV) modules/strings in accordance with IEC/EN60891
and IEC/EN62446-1.
2.2. INSTRUMENT FUNCTIONS
The instrument can perform tests on Monofacial and Bifacial modules/strings up to
1500VDC, 40ADC.
Measurement of I-V Curve (I-V)
The following functions are available on the instrument:
• Activation of Manual or Automatic measurement (*)
• Measurement of Voltage/Current/Power under operating conditions (@OPC)
• Measurement of Voltage/Current/Power referring to standard conditions (@STC) in
accordance with IEC/EN60891
• I-V curve diagram and Power/Voltage under @OPC and @STC condition
• Direct comparison of the @STC values with the nominal values declared by the
manufacturer and display of OK/NO result
Commissioning test measurements (IVCK)
• Open circuit voltage measurement VOC
• Short-circuit current measurement ISC
• Display of results under @OPC and @STC conditions in accordance with
IEC/EN62446-1 and IEC/60891
• OK/NO evaluation of results
General characteristics
• The instrument is supplied in a carrying case with IP67 mechanical protection.
• Safety sliding cover on inputs
• Large graphic colour display (800x480pxl) with capacitive touch-screen
• Internal icon-based menus for intuitive user interface
• Auto power-off (can be disabled) after approx. 5 minutes of inactivity
• HELP function for information on instrument connections
• The instrument is powered by:
➢ Alkaline batteries
➢ NiMH batteries rechargeable via the external power supply unit (provided), C1, P1,
C2, P2 inputs, energy recovery from I-V measurement performed
➢ C1, P1, C2, P2 inputs
• Measurement of front-side and back-side irradiance and temperature of PV modules
via Bluetooth connection with the SOLAR03 remote unit, HT305 reference cell and
PT305 temperature probe
• Customisable internal database for managing up to ca 63.000 PV modules
• 32GB memory card (not expandable) for data storage
• USB-C and WiFi interface for data transfer to PC and dedicated APP (*)
(*) The feature may only be available on certain models

Table of Contents