HT I-V600 User Manual

I-V600
EN - 66
7.3. DELETING RESULTS
1. Tap on the "Memory” icon on the main menu to display the data (see Fig. 71)
2. Select (highlight in blue) a test on the screen and tap on the "Delete” key. The following
message will appear on the display:
Fig. 79: Deleting a measurement result
3. Tap on the key to confirm the deletion of the measurement or on the key to
exit without proceeding
4. Tap on the "Delete all” key to delete all measurements stored in memory. The following
message will appear on the display:
Fig. 80: Deleting an entire internal memory
5. Tap on the key to confirm the deletion of the entire internal memory or on the
key to exit without proceeding
6. Select (highlight in blue) a marker on the screen and tap on the "Delete Marker” key.
The following message will appear on the display

HT I-V600 Specifications

General

Brand	HT
Model	I-V600
Category	Measuring Instruments
Language	English