HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
operation screens except for the call and
menu screens.
If you set this parameter to any other
value, you can vaguely see the
background image on all operation
screens.
Specifies whether to display the local IP
address on the conferencing screen.
This parameter is selected by
default.
Select
conference
controls
Specifies the conference control
functions you want to display on the
Conference Control screen.
Specifies the site name you want to be
superimposed on the video of your site
when it displays to other sites.
When your site joins a multipoint
conference, this site name is displayed in
the site list.
The default value is site.
Specifies the position where your site
name is superimposed on the video of
your site.
The default value is Lower
right corner.
Specifies the duration for displaying a
site name.
The default value is Always
display.
Specifies whether the time zone and time
are superimposed on the local video sent
to remote sites.
The time zone and time are not displayed
on the local video shown on the display
device at your site.
This parameter is not selected
by default.
Specifies the color in which a site name
is displayed.
The default color is white.
Specifies the font size for the site name
display.
The default value is Medium.
Specifies the typeface of a site name.
This parameter is available only when
Language is set to 中文.
The default value is Boldface.
Specifies whether a site name is
displayed in bold.
This parameter is not selected
by default.
Set the
horizontal
offset
Fine-tunes the site name's position left or
right on the local video.
Value range: 0-96.
The default value is 48.
Fine-tunes the site name's position up or
down on the local video.
Value range: 0-96.
The default value is 48.
To Next Page
Loading...
Need help?
General
