HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
9 Embedded Web Management Interface
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9.2 Logging In to the Endpoint Web Interface
To remotely manage the endpoint in web mode, log in to its web interface.
Prerequisites
The correct security certificate has been imported into the endpoint. For details about how to
import a security certificate, see 9.3.7 Importing a Certificate.
You have enabled the web login function. For details about how to enable the function, see
7.3 Supporting Remote Logins.
Procedure
Step 1 Open Internet Explorer.
Step 2 In the address box, enter the endpoint IP address, such as 10.10.10.10.
Step 3 Press Enter.
The login page is displayed.
Step 4 Fill in User name and Password.
The default user name and password are admin and Change_Me respectively.
Step 5 From the Language drop-down list, select a language.
Step 6 Select Log In.
The home page is displayed, as shown in Figure 9-1.
Figure 9-1 Home page of the endpoint web interface
3 Area for displaying your
site name
To Next Page
Loading...
Need help?
General
