HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Result
After the IMS authenticates the password, the endpoint can join an HD video conference over
an IMS network.
6.5 Scheduling a Conference
On your endpoint, you can schedule a specific time to hold a conference.
Background
You can schedule H.323 or 4E1 conferences on the endpoint.
Prerequisites
To schedule an H.323 conference:
− The endpoint is not in use during a conference.
− The endpoint has registered with a GK, and the Huawei GK parameter has been
selected. For details, see 3.1.3 Setting H.323 Parameters.
− Conference line type has been set to Auto or H.323. For details, see 13.3 Setting
Advanced Conference Parameters.
To schedule a 4E1 conference:
− The endpoint is not in use during a conference.
− A SiteCall account has been set on the endpoint. For details about how to set a
SiteCall account, see 3.2.3 Setting 4E1 Parameters.
− Conference line type has been set to 4E1. For details, see 13.3 Setting Advanced
Conference Parameters.
Procedure
Step 1 Choose Advanced > Conference Schedules > Conference.
Step 2 Schedule a conference using either of the following methods:
Select a conference from Conference, set Start time and Conference duration (ranging
from 30 minutes to 360 minutes), and select Schedule.
Select Create. Set the site and conference parameters, set Start time and Conference
duration, and select Schedule.
----End
When the conference is scheduled, you can view its information or delete it on the
Conference Schedules screen.
6.6 Controlling a Conference
During a multipoint conference, you can control the video and audio of the participating sites
using conference control functions.
To Next Page
Loading...
Need help?
General
