HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Upgrading
About This Chapter
Your endpoint supports the following software upgrade methods: automatic, using upgrade
tools, using the bootrom system, and from the endpoint web interface.
During the upgrade, do not power off the endpoint to prevent irreversible faults.
Table 11-1 describes the differences between the four upgrade methods.
Table 11-1 Endpoint upgrade methods
With the automatic upgrade function enabled and automatic
upgrade parameters set, your endpoint obtains upgrade files from
the specified server and installs the upgrade files when the preset
upgrade interval arrives. For details, see 11.1 Automatic Upgrade.
Download the upgrade software to a computer, connect the
computer to the endpoint directly or over the LAN, and upgrade
the endpoint. For details, see 11.2 Tool Upgrade.
Upgrade using the
bootrom system
If upgrading the endpoint using its normal system fails due to a
power failure or other causes, you can use the bootrom system to
complete the upgrade For details, see 11.3 Upgrading the
Endpoint Using the Bootrom System.
Upgrade from the
endpoint web
interface
On the endpoint web interface, manually upgrade the endpoint or
set it to upgrade automatically. For details, see 11.4 Upgrading the
Endpoint on Its Web Interface.
Before the upgrade, complete the following:
To Next Page
Loading...
Need help?
General
