HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
security and prevents information
disclosure.
The default user name and
password for logging in to the
endpoint in SSH mode are debug
and Change_Me respectively.
To protect against unauthorized
access, change the password at
your first login.
A maximum of three users is allowed to simultaneously log in to the endpoint in SSH mode.
A maximum of seven users is allowed to simultaneously log in to the endpoint in SSH and Telnet
modes.
Step 2 Select Save.
----End
7.4 Setting the Upgrade Password
You can set the password required to upgrade the endpoint software using the upgrade tool.
Step 1 Choose Advanced > Settings > Secured > Upgrade password. Set the upgrade password
parameters described in Table 7-4.
Table 7-4 Upgrade password
Specifies the password required to
upgrade your endpoint software
using the upgrade tool.
Default value: Change_Me
The password contains 6 to 32
characters. In addition, it must
include at least two of the
following: uppercase letter,
lowercase letter, digit, or special
character.
To improve device security, set a
password at your first login.
Step 2 Choose Save.
----End
7.5 Setting the Air Content Sharing Password
When connecting to the endpoint, an air content sharing client must provide the predefined
password.
To Next Page
Loading...
Need help?
General
