HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
4 Display Device and Camera
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Display Device and Camera
About This Chapter
To bring an impressive video experience, correctly connect video input and output devices to
the video input and output ports on the endpoint and set the video input and output
parameters.
4.1 Connecting a Display Device
When connecting display devices to the endpoint, choose cables based on the related ports.
4.2 Configuring a Display Device
Correctly setting video output parameters and adjusting video display parameters enable a
display device to deliver superior video quality.
4.3 Connecting a Camera
You can view the video delivered by a camera only after correctly connecting the camera to
the endpoint and setting the required video input parameters.
4.4 Configuring Video Input
Correct video input settings enable your endpoint to properly display video input from the
video input ports.
4.5 Selecting and Controlling a Camera
If you have connected multiple video devices to the video input ports, you must select local
and remote video sources from these devices. Then, you can control the local and remote
cameras to view the desired video.
4.6 Setting Camera Presets
Camera presets are camera positions you store ahead of time. Each camera preset stores the
camera pan, tilt, and zoom (PTZ) settings. You can easily control the camera by switching
between its presets.
4.1 Connecting a Display Device
When connecting display devices to the endpoint, choose cables based on the related ports.
To Next Page
Loading...
Need help?
General
