EasyManuals Logo

Huawei OceanStor CloudStor CSE Administrator's Guide

Huawei OceanStor CloudStor CSE
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #156 background imageLoading...
Page #156 background image
HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
13 Feature Configuration
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13.7 Setting Network Diagnostics Parameters
The firewall protects your IP network by preventing harmful data being passed between the
internal and external networks. Ensure that the firewall settings are applicable to the H.323
videoconferencing system. Otherwise, the system and the firewall will need to be configured
to allow the video conference to pass the firewall.
Choose Advanced > Settings > Network > Firewall. Set the firewall parameters described in
Table 13-7.
Table 13-7 Firewall parameters
Parameter
Description
Setting
H.460
Specifies whether H.460 is enabled for
traversal between public and private
networks. If you set this parameter and
Use NAT to Enable, your endpoint will
use Huawei's proprietary Super Network
Passport (SNP). If you set this parameter
to Enable and your endpoint is
recognized as a private network
endpoint, H.460 will be used for
traversal between public and private
networks.
The default value is Disable.
Use NAT
Specifies whether NAT is enabled for
traversal between public and private
networks. An endpoint installed on a
private network is considered as a public
network endpoint after NAT is enabled
on the endpoint. Even if you then enable
H.460 on the endpoint, it is still
considered as a public network endpoint,
and H.460 is not used.
The default value is Disable.
NAT
address
Specifies the public IP address for your
endpoint. This parameter is required after
you set Use NAT to Enable.
No default value is set for this
parameter.
H.323 call
port
Specifies the port a remote site uses to
receive and send call signaling during
communication with your site.
The default value is 1720.
Value range: 1-65534.
RAS source
port
Specifies the port your site uses to
receive and send Registration,
Admission and Status (RAS) signaling
during communication with remote sites.
The default value is 1719.
Value range: 1-65534.
RAS
destination
port
Specifies the port a remote site uses to
receive and send RAS signaling during
communication with your site.
The default value is 1719.
Value range: 1-65534.
SIP call port
Specifies the port your site uses to send
Session Initiation Protocol (SIP)
signaling during communication with
The default value is 5060.
Value range: 1-65534.

Table of Contents

Other manuals for Huawei OceanStor CloudStor CSE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei OceanStor CloudStor CSE and is the answer not in the manual?

Huawei OceanStor CloudStor CSE Specifications

General IconGeneral
BrandHuawei
ModelOceanStor CloudStor CSE
CategoryConference System
LanguageEnglish

Related product manuals