HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Overview
About This Chapter
This document guides you through configuring, managing, maintaining, and troubleshooting
the endpoint.
When using this document, note the following:
Unless otherwise specified, the descriptions in this document are applicable to the TE80.
Except chapters 9 Embedded Web Management Interface, 10 Maintenance, 12
Troubleshooting and 13.4 Setting SNMP Parameters which apply to the endpoint web
interface, descriptions and configurations in this document apply to the endpoint user
interface controlled by the remote control (remote controlled UI for short).
To access the menu screen, press on the remote control. You can find the option
bar on the left of the menu screen. This option bar is configurable and is your interface
for all functions except calling. For details about how to configure the option bar, see 8.4
Customizing the Option Bar.
To prevent endpoint parameters from being modified by unauthorized users, anyone who
wants to access the Settings screen and use the customized tool bar on the menu
screen must provide the administrator password if the password is not set to blank. For
details about how to set the password, see 7.1 Setting the Administrator Password.
1.1 Definition of an Endpoint Administrator
An endpoint administrator is an enterprise employee who is responsible for managing and
maintaining endpoint operations.
1.2 Requirements for an Endpoint Administrator
As an endpoint administrator, you must meet the following basic endpoint administrator
proficiencies and be capable of collecting all information related to the endpoint and its
working environment.
1.3 Related Documentation
This section lists the documentation that you may refer to when you perform routine
operations and maintenance as well as answering questions from standard users.
1.4 Safety Precautions
To Next Page
Loading...
Need help?
General
