Huawei OceanStor CloudStor CSE Administrator's Guide

HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
11 Upgrading
Issue 02 (2014-03-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
117
Parameter
Description
Setting
Upgrade interval
Specifies the upgrade interval. This
parameter is available only when Auto
upgrade is selected.
The default value is 0.5
h.
Value range: 0.5 h to 24
h.
Server address
Specifies the IP address of the server
that stores the upgrade files for your
endpoint.
This parameter cannot
be left blank.
Example:
http://200.55.55.100/
User name
Password
Specify the user name and password
your endpoint uses to access the server.
No default value is set
for this parameter.
Step 3 Choose Save.
----End
11.2 Tool Upgrade
You can use a computer to locally upgrade the endpoint.
Prerequisites
Before the upgrade, ensure that:

The target software is saved to the computer.

The computer is connected to the endpoint using a straight-through cable, crossover
cable, or switch.

You have obtained the upgrade password. The default upgrade password is Change_Me.
For details, see 7.4 Setting the Upgrade Password.
Upgrading a Single endpoint
Step 1 Power on the computer and endpoint.
Step 2 Extract the compressed software upgrade package on the computer.
Step 3 Run UpgMaster.exe to display the window shown in Figure 11-1.

Huawei OceanStor CloudStor CSE Specifications

General

Brand	Huawei
Model	OceanStor CloudStor CSE
Category	Conference System
Language	English