HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Conference
About This Chapter
You can create a conference or answer an incoming call to join a conference.
6.1 Experiencing a Dual-Stream Conference
During a dual-stream conference, two independent video stream channels, that is, the video
and the presentation, can be transmitted; furthermore, two channels of video from the local
site can be transmitted or two channels of video from a remote site can be received at the
same time.
6.2 Experiencing an MSUC Conference
Huawei videoconferencing systems can be used in the Microsoft Unified Communications
(MSUC) environment. Register the endpoint (networked with MSUC) with a Lync Server
using SIP. After that, the endpoint can place calls to Lync clients, receive calls from Lync
clients, and view Lync clients' online status.
6.3 Joining an Authentication Conference
If you do not know how many sites are expected to join the conference, set the number of
anonymous sites and hold an authentication conference. A site can join the authentication
conference by calling the specified conference access number.
6.4 Joining an HD-Video Conference over an IMS Network
The endpoint can join an HD video conference over an IMS network.
6.5 Scheduling a Conference
On your endpoint, you can schedule a specific time to hold a conference.
6.6 Controlling a Conference
During a multipoint conference, you can control the video and audio of the participating sites
using conference control functions.
6.7 Recording a Conference
Your endpoint can record conferences if your site is the chair site.
6.8 Managing the Address Book
The address book stores site information. You can add, edit, and delete site entries.
To Next Page
Loading...
Need help?
General
