HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table C-2 Operating status icons
The status of the microphone of the local site
when displayed on the lower right corner of the
screen. In this case, the microphone is a
physical device used at the local site. When
one of these icons is displayed in other
positions of the screen, it indicates the
microphone status of a remote site in a
conference.
The status of the speaker of the local site when
displayed on the lower right corner of the
screen. When one of these icons is displayed in
other positions of the screen, it indicates the
speaker status of a remote site in a conference.
The current conference is an encrypted
conference (with media streams encrypted).
The local site is the chair site.
A remote site is currently being viewed.
The local site is currently being viewed.
A presentation is currently being shared.
The local site is being broadcast in the current
conference.
The Do Not Disturb function is enabled at the
local site.
The local video is hidden during a conference.
You can use this function to prevent the local
video from being seen by remote sites. After
this function is enabled, the local site is
displayed as a blue screen at remote sites.
Camera control (up
and down)
The camera lens is turned upward or
downward.
Camera control (left
and right)
The camera lens is turned leftward or
rightward.
The video input from the camera is shrank or
enlarged.
Network impairments or packet loss occurs in
the network where the endpoint is located. see
8.2 Customizing Onscreen Status Icons.
To Next Page
Loading...
Need help?
General
