HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
server can place calls to remote sites
using their IP addresses or site
numbers if the remote sites also
register with SIP servers.
If this parameter is not selected, your
endpoint does not register with the
SIP server. To call another endpoint
through SIP, your endpoint can only
use the called endpoint's IP address.
NOTE
If you select this parameter, you must also set
Server address, Conference service
number, Site number, User name, and
Password.
Specifies the IP address or domain name
of the SIP server with which you want
the endpoint to register.
If you set this parameter to the SIP server
domain name, enable the domain name
server (DNS). If the DNS is not enabled,
enable Proxy server.
Conference
service
number
Specifies the conference service number
for your endpoint to initiate conferences
over an IP multimedia subsystem (IMS)
network.
Set this parameter to the conference
service number obtained from the
administrator of the IMS network.
NOTE
For details about how to set parameters for
interworking with the IMS and joining a
conference on the IMS network, see 6.4
Joining an HD-Video Conference over an
IMS Network.
No default value is set for this
parameter.
Specifies whether to enable the proxy
server.
Select this parameter when the network
environment requires the proxy server or
when Server address is set to the SIP
server domain name but the configured
DNS server fails to resolve this domain
name or the DNS server is not
configured.
NOTE
If you select this parameter, you must also set
Proxy server address, Site number, User
name, and Password.
This parameter is not selected
by default.
Set this parameter based on the
actual SIP network
environment.
Specifies the address of the proxy server.
If you set Server address to the SIP
To Next Page
Loading...
Need help?
General
