HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 6-1 Procedure for joining an authentication conference
Setting the number of anonymous sites: Set the number of anonymous sites when
initiating a conference.
Setting the authentication conference password: When initiating the conference, set
Conference control password, which functions as the authentication conference
password. Anonymous sites must enter this password to join the conference. If
Conference control password is left blank, anonymous sites can join the conference
without entering any password.
Obtaining the access number of the authentication conference: When a conference starts,
endpoints that have joined the conference can view the conference access number by
choosing Advanced > Diagnostics > Status > Conference. On the displayed screen, the
value of Remote number is the conference access number. Anonymous sites can obtain
the conference access number and authentication password from the SMC administrator
or chair site using other methods.
Joining the authentication conference as an anonymous site: Anonymous PSTN sites can
join the conference by dialing the audio access number, and anonymous IP sites can join
the conference by dialing the video access number.
Prerequisites
You have confirmed with the SMC administrator that the conference you want to join
has available resources for anonymous sites.
You have obtained the following from the calling party or SMC administrator: video (or
audio) authentication conference access number and authentication conference password.
The site has registered with the GK server.
Procedure
Step 1 Press on the remote control.
To Next Page
Loading...
Need help?
General
