Figure 12-1 Air conditioner display panel
Step 1 Press ENTER on the home screen of the air conditioner display panel to access the
password input screen.
Step 2 Enter the password 0001 and press ENTER to access the main menu screen.
Step 3 On the main menu screen, choose System Func and press ENTER to access the
system function screen.
Step 4 On the system function screen, choose Para Set and press ENTER to access the
parameter setting screen.
Step 5 Select Addr, press ENTER, set the air conditioner address, and press ENTER.
Table 12-25 Address description
Type
Item Address
Power cabinet Air conditioner on the front door 21 (default)
Air conditioner on the rear door 22 (default)
Battery cabinet Air conditioner on the front door 23 (default)
Air conditioner on the rear door 24 (default)
----End
Scenario 2
If the air conditioner display panel is the one shown in the following
gure, set air
conditioner communications addresses in the following way.
PowerCube 1000 (STC, Saudi Arabia, ICC800-A1-C2,
ESC800-A1)
Installation Guide 12 Power-on and Commissioning
Issue 02 (2021-09-28) Copyright © Huawei Technologies Co., Ltd. 138
To Next Page
Loading...
Need help?
General