Huawei PowerCube 1000 - Combining Cabinets; Installing Components; Component Installation Positions

Figure 7-11 Installing left and right sealing plates
----End
7.6 Combining Cabinets
7.6.1 Removing sealing plates
Procedure
Step 1 Remove the sealing plates from the side that needs to combine cabinets.
NO TE
You are advised to remove the sealing plates before combining cabinets. If you remove the
sealing plates after combining cabinets, remove the connectors from the sealing plates, and
take out the sealing plates between the two cabinets.
PowerCube 1000 (STC, Saudi Arabia, ICC800-A1-C2,
ESC800-A1)
Installation Guide 7 Installing the Cabinet
Issue 02 (2021-09-28) Copyright © Huawei Technologies Co., Ltd. 78