Huawei Quidway S5328C-EI

Naming Rules
The following are the naming rules of the S5348TP-PWR-SI and S5328C-EI-24S.
Figure 1-1 Naming rules
Quidway S5348TP-PWR-SI
A B C D E F G
Quidway S5328C-EI-24S
HD E G
Ide
ntifi
er
Description
A Product brand.
B Switch.
C Product series. "53" indicates the S5300 series.
D Maximum number of interfaces.
NOTE
The number of interfaces on an S5300 can be 24, 28, 48, or 52, depending on the device model.
E Uplink interface type:
l C: A device supports interface cards. There can be two or four uplink interfaces
on an interface card.
l TP: A device has combo interfaces supporting optical and electrical interfaces.
F The S5300 supports Power over Ethernet (PoE).
NOTE
If this letter is not displayed, PoE is not supported.
G Software version type:
l EI: enhanced version, supporting enhanced features
l SI: standard version, supporting basic features
H Downlink interface type. The value 24S indicates that 24 downlink interfaces of the
S5328C-EI-24S are optical interfaces.
NOTE
If this letter is not displayed, all downlink interfaces are electrical interfaces.
Quidway S5300 Series Ethernet Switches
Hardware Description 1 Overview of the S5300
Issue 01 (2011-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1-5