Huawei Quidway S5328C-EI

Interface Card
Type
Name Supported Device Model
ETPB-extended rear
card
l S5328C-EI
l S5352C-EI
l S5328C-EI-24S
l S5328C-SI
l S5352C-SI
l S5328C-PWR-SI
l S5352C-PWR-SI
l S5328C-PWR-EI
l S5352C-PWR-EI
NOTE
Interface cards on the S5300C series are not hot swappable.
4.1.2 Interface Numbering
On the S5300, interfaces are numbered in the format of slot ID/subcard ID/interface sequence
number.
l Slot ID
The slot ID specifies the ID of the slot where a card resides. The S5300 supports only one
card that integrates the control, switching, and service functions, so the slot ID is always
0.
l Subcard ID
The S5300 supports only one front card, so the subcard ID is 0 or 1.
The value 1 indicates an interface on a front card. The value 0 indicates an interface on the
device.
l Interface sequence number
The interface sequence number indicates the number of each interface on a card as shown
in Table 4-2.
Quidway S5300 Series Ethernet Switches
Hardware Description 4 Interface Cards
Issue 01 (2011-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-3