Huawei Quidway S5328C-EI Hardware Description

Table 6-6 describes the fan indicators.
Table 6-6 Fan indicator description
Name Color Description
STATUS Blinking green
(1 Hz)
The fan module is operating properly.
Blinking red (1
Hz)
The fan module is faulty.
6.3 Power Indicators
This section describes the power indicators.
Non-PoE Power Indicators
The non-PoE power indicators are displayed on the panel of the power supply unit through the
lamp guide. For the indicator description, see Table 6-7, Table 6-8.
NOTE
If a switch does not have a power supply unit, see section 6.1 Indicators on the Front Panel for the PWR
indicator description.
Table 6-7 Description of the 150 W DC power indicators
Name
Status Description
STATUS Off
l The input power is out of
range, for example, no
DC input power, DC
input overvoltage, and
DC input undervoltage.
l The output power is out of
range, for example,
undervoltage or
overtemperature occurs.
Green
The DC input power is within
range.
Blinking green The output power is out of
range, for example,
overvoltage, overcurrent, or
short circuit occurs.
Quidway S5300 Series Ethernet Switches
Hardware Description 6 List of Indicators
Issue 01 (2011-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-11

Huawei Quidway S5328C-EI Specifications

General

Brand	Huawei
Model	Quidway S5328C-EI
Category	Switch
Language	English