LUNA2000-200KWH-2H1 Smart String ESS
User Manual
B Repainting the Equipment
Copyright © Huawei Technologies Co., Ltd.
Figure B-2 Wiping a polished or damaged area using anhydrous alcohol
Step 3 Paint zinc-rich primer on the damaged coat.
If the base material is exposed, apply epoxy zinc-rich primer, wait until the paint has dried,
and then apply an acrylic acid top coating.
Select an epoxy zinc-rich primer or acrylic acid top coating with the same color as that of
the equipment's surface coating.
Step 4 Apply paint evenly to the damaged area based on the damage degree until all damage traces
are no longer visible.
To Next Page
Loading...
