LUNA2000-200KWH-2H1 Smart String ESS
User Manual
Copyright © Huawei Technologies Co., Ltd.
When the IP address of the WAN port is in the network segment from 192.168.8.1 to 192.168.8.255,
set the default gateway to 192.168.8.1 and the IP address of the LAN port to 192.168.3.10. If the
connected port is a LAN port, you need to adjust the network configuration of the PC.
It is recommended that the PC be connected to the LAN port of the CMU or the GE port of the
SmartModule. When the PC is connected to the GE port of the SmartModule, adjust the network
configuration of the PC to the configuration mode when the PC is connected to the LAN port of the
CMU.
Step 3 Set LAN parameters.
If the CMU is connected to a local area network (LAN) and a proxy server has been set,
you need to cancel the proxy server settings.
If the CMU is connected to the Internet and the PC is connected to the LAN, do not cancel
the proxy server settings.
1. Open Internet Explorer.
2. Choose Tools > Internet Options.
3. Click the Connections tab and then click LAN settings.
4. Clear Use a proxy server for your LAN.
Figure D-2 LAN settings
5. Click OK.
Step 4 Log in to the CMU WebUI.
1. In the address box of a browser, enter https://XX.XX.XX.XX (XX.XX.XX.XX is the IP
address of the CMU) and press Enter. The login page is displayed. If you log in to the
WebUI for the first time, a security risk warning is displayed. Click Continue to this
website to log in to the WebUI.
To Next Page
Loading...
