Huawei SmartLi 3.0 - Page 115

NO TICE
● The BCB o alarm (the red indicator is steady on) is displayed on the SmartLi
LCD. No action is required. After the battery circuit breaker is switched on, the
alarm will be automatically cleared.
● The green indicator blinks intermittently. After 1 minute, the BCU starts. The
green indicator blinks at super short intervals and the red indicator is steady
on.
Step 3 Obtain the startup password through the app. After the application is approved,
enter the startup password on the screen to complete battery cabinet
authorization.
Figure 6-2 Rack 1 screen
NO TICE
Technical support engineers can obtain the service authorization code through the
app. For details, see the Data Center Facility Deployment Guide .
Step 4 Set the language, time, date, iManager-M service, network parameters, and
system parameters on the Settings Wizard screen.
SmartLi 3.0
User Manual (Short-Term Backup Power) 6 Power-On and Commissioning
Issue 10 (2024-01-31) Copyright © Huawei Digital Power Technologies Co., Ltd. 106