4.3 Battery Module Storage Requirements
Ensure that batteries are stored in a dry, clean, and ventilated indoor environment
that is free from sources of strong infrared or other radiations, organic solvents,
corrosive gases, and conductive metal dust. Do not expose batteries to direct
sunlight or rain and keep them far away from sources of heat and ignition.
If a battery is faulty (with scorch, leakage, bulge, or water intrusion), move it to a
dangerous goods warehouse for separate storage. The distance between the
battery and any combustible materials must be at least 3 m. The battery must be
scrapped as soon as possible.
Place batteries correctly according to the signs on the packing case during storage.
Do not place batteries upside down, lay them on one side, or tilt them. Stack
batteries in accordance with the stacking requirements on the packing cases.
Store batteries in a separate place. Do not store batteries together with other
devices. Do not stack batteries too high. The site must be equipped with qualied
re suppression facilities, such as re sand and re extinguishers.
It is recommended that batteries be used soon after being deployed onsite.
Batteries that have been stored for an extended period shall be charged
periodically. Otherwise, they may be damaged.
● Battery modules shall be stored at an ambient temperature ranging from 0°C
to 60°C. It is recommended that the humidity and heat be constant to avoid
condensation. The recommended storage temperature ranges from 20°C to
30°C.
● If the storage temperature ranges from 0°C to 40°C (recommended storage
temperature: 20°C to 30°C), the storage period can be two months or longer.
Storage for an extended period of time is not recommended. Use batteries in
a timely manner or charge batteries based on the lithium battery charge
interval.
SmartLi 3.0
User Manual (Short-Term Backup Power) 4 Transportation and Storage Requirements
Issue 10 (2024-01-31) Copyright © Huawei Digital Power Technologies Co., Ltd. 47
To Next Page
Loading...
