Keep batteries in the correct direction during transportation. They must not be
placed upside down or tilted, and must be protected against falling down,
mechanical impact, rains, snows, and falling into water during transportation.
● Batteries have obtained the certications of the UN38.3 (UN38.3: section 38.3
of the sixth Revised Edition of the Recommendations on the Transport of
Dangerous Goods, Manual of Tests and Criteria) and SN/T 0370.2-2009 (Part
2: Performance Test of the Rules for the Inspection of Packaging for Exporting
Dangerous Goods). This product belongs to class 9 dangerous goods.
● The transportation service provider must be qualied for transporting
dangerous goods.
● The batteries can be delivered to the site directly and transported by land and
water.
● Comply with the international regulations on the transport of dangerous
goods and meet the requirements of the transportation regulatory authorities
in the countries of departure, route, and destination.
● Choose sea or roads in good conditions for transportation. Do not transport
batteries by railway or air. Avoid tilt or jolt during transportation.
● Maritime transport shall comply with the
International Maritime Dangerous
Goods Code
(IMDG Code).
● Road transport shall comply with the
Agreement Concerning the International
Carriage of Dangerous Goods by Road
(ADR) or JT/T 617.
● Before transportation, check that the battery package is intact and that there
is no abnormal odor, leakage, smoke, or sign of burning. Otherwise, the
batteries cannot be transported.
● The packing case must be secured for transportation. Handle the case with
care during loading and unloading, and take moisture-proof measures during
transportation.
● Exercise caution when moving batteries to prevent bumping and ensure
personal safety.
● Unless otherwise specied, dangerous goods cannot be mixed with goods
containing food, medicine, animal feed, or their additives in the same vehicle
or container.
● Unless otherwise specied, when dangerous goods packages are loaded in the
same vehicle or container as ordinary goods, they shall be separated in either
of the following ways:
– Use a spacer that is as high as the packages.
– Keep a distance of at least 0.8 m around.
● Before transporting a faulty battery (with scorch, leakage, bulge, or water
intrusion), insulate its positive and negative terminals, pack it, and place it in
an insulated explosion-proof box as soon as possible. Record information such
as the site name, address, time, and fault symptom on the box.
● When transporting faulty batteries, avoid approaching ammable material
storage areas, residential areas, or other densely populated places, such as
mass transit facilities or elevators.
SmartLi 3.0
User Manual (Short-Term Backup Power) 4 Transportation and Storage Requirements
Issue 10 (2024-01-31) Copyright © Huawei Digital Power Technologies Co., Ltd. 46
To Next Page
Loading...
